Fire Rated Paint for Metal Steel

Fire Rated Intumescent Coat [For Structural Steel]


*Up to 2 hour fire rating.
*Durable and decorative finish.
*Fast drying time.
*Green Label Product.
*Bomba Certification [Malaysia Fire Department].


Suitable for structural steel used as primer.[Apply directly to contour of primed I and H section columns, angles, channels and beams and hollow sections.
It can be sealed and protected with a decorative water based top coat.
Need advice from specialist applicator on the method of application.

Theoritical Coverage1mm WFT = 0.7mm DFT [Dry film Thickness] = 1 litre per SqM , 1mm = 1000μm[microns]
Surface BurningFlame spread 5, smoke development 35 when tested to ASTM E84.
Durometer Hardness80 shore D when tested to ASTM D2240.
Initial SetApprox 6 hours at 20'C and 50% RH for 0.4mm WFT.
Impact Resistance18 kg/m when tested to ASTM D2794.
Fire ResistanceStructures protected with the coat have undergone fire resistance tests at approved independant laboratories to recognised standards throughout the world including:
- UK [BS476 : Part 21 : 1987]
- Canada and USA [ASTM E119 and ASTM E84]
- Australia [AS1530 : Part 4]
Assessed in accordance with ASFP 'Fire protection for structural steel in buildings' procedures.
Storage- Indoors in dry conditions between 10'C and 38'C.
- Protect from frost, excessive heat [above 45'C] and strong radiant sunlight.
Shelf LifeMaximum 10 months in original sealed containers.
EnvironmentalDo not discharge into drains, watercourses or soil.

Product Specification

Main Raw MaterialPolyvinyl Acetate Resins and Filler
UsageAppliance Paint, Building Coating, Structural Steel
Application MethodAir Spray and Roller
FinishFlat Matt Finish
Max Thickness Per CoatWet film thickness at 1.6mm [Spray] , 0.76mm using brush
Practical CoverageDepend on surface texture, substrate, application method and technique
Theoritical CoverageApprox 18.79 SqM per container[1mm per litre]
CureBy air drying
Abrasion Resistance0.6505g per 1000 cycles when tested to ASTM D4060
Solid by Weight70% ± 2%
Density1.33 kg/litre
pH Value8.0 ± 0.2 at 25'C

 Inquiry - Fire Rated Paint for Metal Steel